Detail HT Kenwood THK4AT
RUGGEDIZED WEATHERPROOF CONSTRUCTION
This transceiver is built tough to meet the stringent MIL-STD 810 C/ D/ E/ F standards for resistance to rain, vibration, shock and humidity. It also meets the international IP54 standard for dust and water resistance. COMPLIANT LOGO
OTHER FEATUERS
DTMF encode Wide/ narrow deviation selection
Memory channel transfer Automatic simplex check
Automatic repeater offset SMA antenna connector
Time-out timer Auto power off
Specifications
TH-K2AT TH-K4AT
General
Frequency Range* TX: 144-146MHz
RX: 144-146MHz TX: 430-440MHz
RX: 430-440MHz
Mode F3E( FM) , F2D
Antenna Impedance 50©
Operation Temperature Range -20° C ~ + 60° C
Power Requirements ( nominal)
External
Battery DC 12.0-16.0 V
DC 6.0-9.0 V
Microphone Impedance 2k©
Dimensions ( WxHxD)
With PB-43N
( Projections not included)
With PB-43N
( Projections included)
58 x 110 x 28.4 mm
58 x 127.7 x 35.8 mm
Weight 355g ( with PB-43N, antenna, belt hook)
Transmitter
RF Output Power ( approx.)
HI: DC-IN 13.8 V
PB-43N 7.2 V
MID: DC-IN 13.8 V
PB-43N 7.2 V
LO:
5W
5W
1.5W
1.5W
0.5W
Modulation Reactance modulation
Maximum Frequency Deviation less than ± 5 kHz
Modulation Distortion less than 5% ( 300 Hz ~ 3 kHz)
Receiver
Circuitry Double Super Heterodyne
Intermediate Frequency
1st IF
2nd IF 38.85 MHz
450 kHz
Sensitivity ( 12dB SINAD) less than 0.18 ¼ V
Squelch Sensitivity less than 0.13 ¼ V
Selectivity
-6 dB
-40 dB more than 10 kHz
less than 28 kHz
Audio Output Power more than 400 mW ( 10% distortion)
* Specifications are guaranteed for amateur radio bands only
Battery Life Unit: Hours ( figures approximate)
TH-K2AT TH-K4AT
High Mid Low High Mid Low
BT-14, 6 alkaline batteries 4 8 10.5 3 7 9.5
PB-43N 5.5 8.5 11 5 7.5 10
Assuming a duty cycle of 6-second transmit, 6-second receive, 48-second standby
Kenwood follows a policy of continuous advancement in development.For this reason specifications may be changed without notice
Tampilkan Lebih Banyak